[논문]
김익수, 이문구, Martin Byung-Guk Jun, 조정호, 전용호,
Very high cycle fatigue on gas metal arc butt-welded AA6061-T6 plates
, Journal of Mechanical Science and Technology
, pp.6649
-6655
(Dec, 2023)
[논문]
김익수, 이문구, 전용호,
Review on Machine Learning Based Welding Quality Improvement
, International Journal of Precision Engineering-Smart Technology
, pp.219
-226
(Jul, 2023)
[논문]
전용호, 정준영, 정창호, 김진우, 유준일, 이재윤, 차용환, 김정택,
Pre-sliding of femoral neck system improves fixation stability in pauwels type III femoral neck fracture: a finite element analysis
, BMC MUSCULOSKELETAL DISORDERS
, pp.1
-11
(Jun, 2023)
[논문]
김태영, 전용호, 정준영, 정창호, 박찬호, 유준일, 차용환, 김정택,
Trajectory of bolt and length of plate in femoral neck system determine the stability of femur neck fracture and risk of subsequent subtrochanteric fracture : a finite element analysis
, BMC MUSCULOSKELETAL DISORDERS
, pp.1
-15
(Jun, 2023)
[논문]
김민수, 김익수, 김현태, 이문구, 전용호,
Laser Cladding of Al 102 Powder on Al 4047 with Direct Energy Deposition
, Metals
, pp.1
-10
(Apr, 2023)
국제학술논문지
[논문]
김익수, 이문구, Martin Byung-Guk Jun, 조정호, 전용호,
Very high cycle fatigue on gas metal arc butt-welded AA6061-T6 plates
, Journal of Mechanical Science and Technology
, pp.6649
-6655
(Dec, 2023)
[논문]
김익수, 이문구, 전용호,
Review on Machine Learning Based Welding Quality Improvement
, International Journal of Precision Engineering-Smart Technology
, pp.219
-226
(Jul, 2023)
[논문]
전용호, 정준영, 정창호, 김진우, 유준일, 이재윤, 차용환, 김정택,
Pre-sliding of femoral neck system improves fixation stability in pauwels type III femoral neck fracture: a finite element analysis
, BMC MUSCULOSKELETAL DISORDERS
, pp.1
-11
(Jun, 2023)
[논문]
김태영, 전용호, 정준영, 정창호, 박찬호, 유준일, 차용환, 김정택,
Trajectory of bolt and length of plate in femoral neck system determine the stability of femur neck fracture and risk of subsequent subtrochanteric fracture : a finite element analysis
, BMC MUSCULOSKELETAL DISORDERS
, pp.1
-15
(Jun, 2023)
[논문]
김민수, 김익수, 김현태, 이문구, 전용호,
Laser Cladding of Al 102 Powder on Al 4047 with Direct Energy Deposition
, Metals
, pp.1
-10
(Apr, 2023)
[논문]
강유성, 김가을, 이문구, 장가연, 권신, 전용호,
Design of High‑Durability Superhydrophobic Microsurface Structures
, INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING
, pp.1
-14
(Aug, 2022)
[논문]
정창호, 이문구, 남찬혁, 전용호,
Numerical Analysis of Laser Pattern Effects to Residual Stress on Metal 3D Printing
, APPLIED SCIENCES-BASEL
, pp.1
-14
(May, 2022)
[논문]
정창호, 윤하승, 전용호, 박찬호, 유준일, 차용한, 김정택,
Mechanical effects of surgical variations in the femoral neck system on Pauwels type III femoral neck fracture
, BONE & JOINT RESEARCH
, pp.102
-111
(Feb, 2022)
[논문]
최병주, 최용준, 이문구, 김정섭, 이상원, 전용호,
Defect Detection Using Deep Learning-Based YOLOv3 in Cross-Sectional Image of Additive Manufacturing
, ARCHIVES OF METALLURGY AND MATERIALS
, pp.1037
-1041
(Aug, 2021)
[논문]
이진호, 서창훈, 전용호, 홍태하, 이문구, 김효영,
Implicit force and position control to improve drilling quality in CFRP flexible robotic machining
, Journal of Manufacturing Processes
, No.68
, pp.1123
-0033
(Jun, 2021)
[논문]
강유성, 김가을, 전용호, 권신, 지홍규, 이문구,
Optimizing Roller Design to Improve Web Strain Uniformity in Roll-to-Roll Process
, APPLIED SCIENCES-BASEL
, Vol.1
, No.1
, pp.7564
-7564
(Oct, 2020)
[논문]
김정택, 송형근, 전용호, 정창호, 박찬호, 심권호, 유준일, 차용한, 원예연,
Mechanical effect of different implant caput-collum-diaphyseal angles on the fracture surface after fixation of an unstable intertrochanteric fracture: A finite element analysis
, ASIAN JOURNAL OF SURGERY
, Vol.42
, No.11
, pp.947
-956
(Nov, 2019)
[논문]
성은호, 서창훈, 송현민, 전용호, 최병주, 최영만, 김기현, 이문구,
Design and experiment of noncontact eddy current damping module in air bearing–guided linear motion system
, ADVANCES IN MECHANICAL ENGINEERING
, Vol.11
, No.8
, pp.1
-11
(Aug, 2019)
[논문]
이문구, 최병주, 정도현, 조인식, 전용호,
FRICTION AND WEAR BEHAVIOR OF DIRECT METAL DEPOSITION ON SUH3
, ARCHIVES OF METALLURGY AND MATERIALS
, Vol.64
, No.3
, pp.841
-844
(Jun, 2019)
[논문]
이문구, 정창호, 전용호,
ANALYSIS AND VERIFICATION OF PHYSICAL PROPERTIES OF AN AISI 4140 STEEL BY VICKERS INDENTATION ANALYSIS ACCORDING TO THE PRESENCE OF RESIDUAL STRESSES
, ARCHIVES OF METALLURGY AND MATERIALS
, Vol.64
, No.3
, pp.823
-827
(Jun, 2019)
[논문]
최병주, 강유성, 전용호, 최현준, 이문구,
2-Step Drop Impact Analysis of a Miniature Mobile Haptic Actuator Considering High Strain Rate and Damping Effects
, MICROMACHINES
, Vol.10
, No.4
, pp.272
-284
(Apr, 2019)
[논문]
염현호, 이문구, 최병주, 이광재, 전용호,
MICROSTRUCTURAL ANALYSIS OF ASYMMETRIC DILUTION BY ROTATING DIRECT METAL DEPOSITION
, ARCHIVES OF METALLURGY AND MATERIALS
, Vol.64
, No.2
, pp.535
-538
(Apr, 2019)
[논문]
이문구, 최병주, 이광재, 이규항, 전용호,
Design of rotatable direct energy depositon optical system
, JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY
, Vol.33
, No.4
, pp.1833
-1839
(Apr, 2019)
[논문]
전용호, 박선진, 안다훈, 이길연, 이문구,
A novel intra-abdominal retraction device with an extra-abdominal magnetic manipulator for minimally invasive surgery
, JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY
, Vol.32
, No.12
, pp.6029
-6035
(Dec, 2018)
[논문]
서창훈, 이형규, 전용호, 김효영, 이문구,
Reaction Force Compensator for High-Speed Precision Stage of Laser Direct Imaging Process
, SHOCK AND VIBRATION
, pp.8324539
-8324539
(Jun, 2018)
[논문]
ASHUTOSH SHARMA, 전용호, 안병민, Ashok K. Srivastava,
Template-assisted fabrication of nanostructured tin (β-Sn) arrays for bulk microelectronic packaging devices
, METALS
, Vol.8
, No.5
, pp.347-1
-347-11
(May, 2018)
[논문]
조인식, 이문구, 이형규, 이창순, 최창하, 전용호,
Effect of the Ultrasonic Nanocrystalline Surface Modification (UNSM) on Bulk and 3D-Printed AISI H13 Tool Steels
, METALS
, Vol.7
, No.11
, pp.510
-515
(Nov, 2017)
[논문]
정창호, 염현호, 이문구, 최병주, 전용호,
Design and optimisation of micro forging system to reduce parasitic motion
, INTERNATIONAL JOURNAL OF MATERIALS & PRODUCT TECHNOLOGY
, Vol.55
, No.4
, pp.392
-409
(Aug, 2017)
[논문]
강유성, 이수훈, 전용호, 홍민성, 강동우, 이낙규, 이문구,
Analytical study on web deformation by tension in roll-to-roll printing process
, IOP Conference Series: Materials Science and Engineering
, Vol.1
, No.227
, pp.012067
-012067
(Aug, 2017)
[논문]
정창호, 이문구, 전용호,
EFFECT OF LASER PREHEATING AISI 4140 SPECIMENS FOR MICRO-FORGING
, ARCHIVES OF METALLURGY AND MATERIALS
, Vol.62
, No.2B
, pp.1209
-1213
(Jul, 2017)
[논문]
최병주, 전용호, 권지운, 이문구,
Development of Novel Platform to Predict the Mechanical Damage of a Miniature Mobile Haptic Actuator
, MICROMACHINES
, Vol.8
, No.156
, pp.1
-12
(May, 2017)
[논문]
염현호, 설태호, 이문구, 최병주, 전용호,
Very High Cycle Fatigue of Butt-Welded High-Strength Steel Plate
, METALS
, Vol.7
, No.3
, pp.1
-11
(Mar, 2017)
[논문]
Auezhan Amanov, 안병민, 이문구, 전용호, 편영식,
Friction and Wear Reduction of Eccentric Journal Bearing Made of Sn-Based Babbitt for Ore Cone Crusher
, MATERIALS
, pp.950
-962
(Nov, 2016)
[논문]
오민철, 염현호, 전용호, 안병민,
Microstructural characterization of laser heat treated AISI 4140 steel with improved fatigue behavior
, ARCHIVES OF METALLURGY AND MATERIALS
, Vol.60
, No.2B
, pp.1331
-1334
(Jun, 2015)
[논문]
이원기, 이진우, 전용호, 홍민성, 남성호, 이문구,
Failure Diagnosis System for a Ball-Screw by Using Vibration Signals
, SHOCK AND VIBRATION
, Vol.2015
, pp.1
-9
(Jun, 2015)
[논문]
Zhao Yayun, 장승봉, 이수훈, 전용호, 김은희, 이문구,
Design and verification of a novel hollow vibrating module for laser machining
, REVIEW OF SCIENTIFIC INSTRUMENTS
, Vol.86
, No.4
, pp.045104-1
-045104-7
(Apr, 2015)
[논문]
손영웅, 설태호, 전용호, 이문구, 이혜진,
Design and Evaluation of Stamping Module to Pattern Alignment Marks for LED Post-Processing
, APPLIED MECHANICS AND MATERIALS
, Vol.751
, pp.298
-301
(Jan, 2015)
[논문]
Frank Pfefferkorn, 전용호,
Tool wear effect on micro end milling of biocompatible metals
, INTERNATIONAL JOURNAL OF SURFACE SCIENCE AND ENGINEERING
, Vol.8
, No.2/3
, pp.213
-224
(Apr, 2014)
[논문]
이문구, 김가은, 이수훈, 이찬우, 전용호,
Design of voice coil motor dynamic focusing unit for a laser scanner
, REVIEW OF SCIENTIFIC INSTRUMENTS
, Vol.84
, No.4
, pp.045104-1
-045104-8
(Apr, 2014)
[논문]
조인식, 박진일, 전용호,
Fatigue behaviour of Ti-6Al-4V alloy under combined low and high cycle and ultrasonic loading
, INTERNATIONAL JOURNAL OF MATERIALS & PRODUCT TECHNOLOGY
, Vol.48
, No.1/2/3/4
, pp.18
-33
(Feb, 2014)
[논문]
전용호, 성연욱, 이승민, 이해진, 이문구,
Impact analysis on automatic focusing actuator for mobile electronic devices
, INTERNATIONAL JOURNAL OF MATERIALS & PRODUCT TECHNOLOGY
, Vol.48
, No.1/2/3/4
, pp.234
-247
(Feb, 2014)
[논문]
이정재, Yanlu, 전용호, 이문구,
Design of a planar 3-DOF parallel micromanipulator
, JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY
, Vol.27
, No.10
, pp.2985
-2990
(Oct, 2013)
[논문]
전용호, 박형욱, 이춘만,
Current Research Trends in External Energy Assisted Machining
, INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING
, Vol.14
, No.2
, pp.337
-342
(Feb, 2013)
[논문]
전용호, 이춘만,
Current Research Trend on Laser Assisted Machining
, INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING
, Vol.2
, pp.311
-317
(Feb, 2012)
[논문]
Frank E Pfefferkorn, 전용호, Axel Feherenbacher, George Gruetzmacher, Gilbert Haddad, Ji Young Park, John Mccarthy, Kristin Lee Bunker, M.Abbas Virji, Maria Powell, Mark D Hoover, Dhimiter Bello,
Characterization of Exposures to Airborne Nanoscale Particles During Friction Stir Welding of Aluminum
, ANNALS OF OCCUPATIONAL HYGIENE
, pp.1
-18
(May, 2010)
[논문]
Benjamin A Jasperson, 전용호, Frank E Pfefferkorn, Kevin T Turner, Weilin Qu,
Comparison of Micro-Pin-Fin and Microchannel Heat Sinks Considering Thermal-Hydraulic Performance and Manufacturability
, IEEE TRANSACTIONS ON COMPONENTS AND PACKAGING TECHNOLOGIES
, Vol.33
, No.1
, pp.148
-160
(Mar, 2010)
[논문]
황동현, 설태호, 손영웅, 전용호, 이문구,
Design of Alignment Mark Stamper Module for LED Post-Processing
, 한국생산제조시스템학회지
, Vol.24
, No.2
, pp.155
-159
(Apr, 2015)
[논문]
신예슬, 송봉섭, 전용호, 이교범,
최대 전력점 추종의 속응성을 고려한 무인 태양광 자동차 시스템 설계
, 전력전자학회 논문지
, Vol.18
, No.4
, pp.376
-386
(Aug, 2013)
[논문]
염현호, 이문구, 이춘만, 전용호,
SCM440H 금형강의 표면 처리에 따른 피로 특성 연구
, 한국정밀공학회지
, Vol.30
, No.8
, pp.779
-784
(Aug, 2013)
[논문]
김태현, 전용호, 이문구,
진동 분석을 이용한 사출성형기 유압펌프 결함 진단 시스템에 관한 연구
, 한국생산제조시스템학회지
, Vol.22
, No.3
, pp.343
-348
(Jun, 2013)
[논문]
전용호, 강승준, 김동권, 김현정, 최병주, 이문구,
초음파를 이용한 마이크로 혼합기 제작
, 한국생산제조시스템학회지
, Vol.22
, No.3
, pp.459
-464
(Jun, 2013)
[논문]
이문구, 전용호,
초정밀 진동 보조 가공 연구 동향
, 한국정밀공학회지
, Vol.29
, No.8
, pp.834
-839
(Aug, 2012)
[논문]
전용호, 김종엽, 신충식, 조인식,
초음파 가속피로시험 적용 사례 및 연구 동향
, 대한기계학회 논문집A
, Vol.36
, No.6
, pp.707
-712
(Apr, 2012)
[논문]
김우진, 조성학, 전용호,
압전구동기를 이용한 정밀 가공용 초음파 진동장치 해석 및 실험
, 한국정밀공학회지
, Vol.28
, No.12
, pp.1347
-1352
(Dec, 2011)
국제학술발표
[학술회의]
김익수, 전용호, 이문구,
Analysis of YOLOv5 results based on detection speed and precision
, ICMTE 2022
(May, 2022)
[학술회의]
민상화, 이문구, 전용호,
Residual Vibration Analysis for 3D Semiconductor Packaging Inspection Equipment
, ICMTE 2022
(May, 2022)
[학술회의]
김세은, 이문구, 강영재, 전용호, 정창호, 정윤호,
Design of magnetic Traction clip for colonoscopic Perforation Suture
, IBEC 2021
, Vol.1
, No.1
, pp.354
-355
(Nov, 2021)
[학술회의]
양재영, 전용호, Kee S. Moon, 이문구,
High Sensitivity Optical Vibration Sensor System Using Principle of Beating
, PRESM 2021
(Jul, 2021)
[학술회의]
이문구, 정창호, 전용호,
Simulation of Selective Laser Melting Process with Finite Element Method with Thermal Structure Coupled Analysis
, PRESM2021 (International Symposium on Precision Engineering and Sustainable Manufacturing)
(Jul, 2021)
[학술회의]
정창호, 전용호, 안병민, 이문구, 채명진,
Ti6Al4V fatigue life measurement by ultrasonic fatigue test made with metal additive manufacturing
, 16th International Symposium on Novel and Nano Materials
(Nov, 2020)
[학술회의]
최병주, 전용호, 배정훈, 이문구, 정창호, 홍민성,
Tensile analysis of 3D printed carbon fiber reinforced plastic
, The 9th International Conference of Manufacturing Technology Engineers
(Oct, 2020)
[학술회의]
손병언, 전용호, 윤효준, 이문구, 이수훈,
Automation of production simulation using collision avoidance method
, The 9th International Conference of Manufacturing Technology Engineers
(Oct, 2020)
[학술회의]
강유성, 전용호, 이문구, 정창호, 이승준,
Pressure deviation analysis of pressurized roller system for superhydrophobic surface fabrication
, PRESM 2019
(Jul, 2019)
[학술회의]
강유성, 이문구, 전용호, 정창호,
Contact pressure analysis in roll to roll process for super-hydrophobic surface fabrication
, TechConnect 2019
(Jun, 2019)
[학술회의]
정창호, 전용호, 강유성, 이문구,
Measurement of High-Speed Impact Properties of AISI 4140 Steel by Heat Treatment Processes
, The 8th International Conference on Manufacturing Machine Design and Tribology
(Apr, 2019)
[학술회의]
이문구, 윤효준, 이수훈, 전용호, 홍민성,
Finding the most efficient layout using Dmworks simulation
, 2018 ICMTE
(Oct, 2018)
[학술회의]
윤경택, 최영만, 강성훈, 임현호, 전용호,
Optimal Design of Knee Joint Motion Based Biomechanical Energy Harvester by Analyzing Design Parameters
, PRESM 2018
(Jul, 2018)
[학술회의]
전용호, 이문구, 최병주, 이광재,
Microstructural analysis of asymmetric dilution by rotating direct metal deposition
, The 15th International Symposium on Novel and Nano Materials
(Jul, 2018)
[학술회의]
전용호, 이문구, 최병주, 조인식,
Friction and wear behavior of direct metal deposition with heat treatment on SUH3
, The 15th International Symposium on Novel and Nano Materials
(Jul, 2018)
[학술회의]
전용호, 이문구, 정창호,
simulation and verification of the residual stress effect on vickers indentatin test for AISI 4140
, The 15th International Symposium on Novel and Nano Materials
(Jul, 2018)
[학술회의]
전용호, 이문구, 김찬중, 박선진, 윤상철, 이길연, 조성우,
A novel intra-abdominal retraction device with extra- magnetic manipulator for laparoscopic surgery
, Computer Assisted Radiology and Surgery 2018
, Vol.1
, No.1
, pp.S223
-S223
(Jun, 2018)
[학술회의]
성은호, 이문구, 전용호, 최영만, 김기현,
Design and Experiment of Noncontact Eddy Current Damper in Air bearing Guided Linear Motion system
, International Muiti-Conference on Engineering and Technology Innovation 2017
, Vol.1
, No.1
, pp.134
-134
(Oct, 2017)
[학술회의]
강유성, 이문구, 김가을, 전용호, 정창호, 최영만, 강동우,
Design of novel roller for register error compensation in roll-to-roll process
, 43rd International Conforence on Micro and Nanoengineering
, Vol.1
, No.1
, pp.178
-178
(Sep, 2017)
[학술회의]
정창호, 전용호, 이문구, 이수훈, 홍민성,
FATIGUE EFFECT OF LASER-ASSIST HIGH FREQUENCY MICRO FORGING OF AISI 4140 STEEL
, ModTech International Conference 2017
(Jun, 2017)
[학술회의]
김가을, 이문구, 이수훈, 전용호, 권신, 김현태,
Development of the roll-to-roll winding system for fabrication of the fine-pattern roll
, 7th International Concerence on Manufacturing, Machine Design and Tribology
(Apr, 2017)
[학술회의]
최병주, 이문구, 김현정, 전용호, 정재화,
Experimental and Analytical Characterization of Drop Impact Behavior for a Mobile Haptic Actuator
, 7th International Concerence on Manufacturing, Machine Design and Tribology
(Apr, 2017)
[학술회의]
서창훈, 이문구, 김현정, 전용호,
A Vibration Reduction Mechanism of Precision Stage Precision stafe for Laser Direct Imaging
, IMETI2016
(Oct, 2016)
[학술회의]
서창훈, 이문구, 전용호,
A DEVELOPMENT OF VIBRATION REDUCTION MECHANISM FOR PRECISION STAGE OF UV-LASER DRILLING PROCESS
, 31st ASPE Annual Meeting
(Oct, 2016)
[학술회의]
전화현, 전용호, 이문구, 최윤호, 송일재,
Experimental Study on Mixing Performance of High Pressure Air and Water in Nozzle
, ICMTE 2016
(Oct, 2016)
[학술회의]
심성환, 이문구, 이수훈, 전용호, 홍민성, 박두환, 송정민, 최요환,
Design of a Normal Stress Type Electromagnetic Actuator for Fast Tilting
, ICMTE 2016
(Oct, 2016)
[학술회의]
노현규, 이문구, 이수훈, 전용호, 천두호, 최영만, 홍민성,
Design Optimization of Linear Resonant Actuator with Halbach Magnet Array
, ICMTE 2016
(Oct, 2016)
[학술회의]
노현규, 이문구, 전용호, 정윤호,
A Novel Traction Device for Clipping Large Perforation in Endoscopic Surgery
, ICMTE 2016
(Oct, 2016)
[학술회의]
강유성, 이문구, 성은호, 이수훈, 전용호, 홍민성,
Dynamic Analysis of Flexible Substrates for Roll to Roll Process
, ICMTE 2016
(Oct, 2016)
[학술회의]
조혁상, 이문구, 이수훈, 전용호, 홍민성,
Performance Prediction of Piezoelectric Energy Harvesting Cantilever with Halbach Magnet Array
, ICMTE 2016
(Oct, 2016)
[학술회의]
최병주, 이문구, 염현호, 이수훈, 전용호, 홍민성,
Application of Structural Damping for Drop Impact Analysis of Mobile Haptic Actuator
, ICMTE 2016
(Oct, 2016)
[학술회의]
최병주, 전용호, 이문구, 이수훈, 홍민성, 이광재,
Chemical Composition Analysis of Laser Cladding Cross Section
, 2016 International Conference on Manufacturing Technology Engineers
, Vol.1
, No.1
, pp.126
-126
(Oct, 2016)
[학술회의]
정창호, 전용호, 이문구, 이수훈, 홍민성,
Micro Structure ananlysis and Vikers Hardness Measurment for Primary Quality Test
, 2016 International Conference on Manufacturing Technology Engineers
, Vol.1
, No.1
, pp.136
-136
(Oct, 2016)
[학술회의]
서창훈, 이문구, 이수훈, 전용호, 조재훈, 홍민성,
Eddy Current Damper to Improve Positioning Capability for Air Bearing Guided Linear Motion System
, ICMTE 2016
(Oct, 2016)
[학술회의]
박성룡, 이문구, 이수훈, 전용호, 홍민성,
Configuration of ICT-based Flexible Automation Systems using DMWorks
, ICMTE 2016
(Oct, 2016)
[학술회의]
정창호, 전용호, 이문구, 이수훈, 홍민성,
Oscilloscopic Frequency and Displacement Measurement of TERFENOL-D with Various Tips
, ICMTE 2016
(Oct, 2016)
[학술회의]
최병주, 이문구, 염현호, 전용호,
Experimental verification of drop impact test and analysis for mobile electronics
, 4M/IWMF2016 Conference
(Sep, 2016)
[학술회의]
염현호, 전용호, 설태호, 이문구, 최병주,
Design of Welded High Strength Steel Plate Fatigue Specimen for Accelerated Ultrasonic Fatigue Tester
, ISNNM 2016
(Jul, 2016)
[학술회의]
정창호, 전용호, 박진일, 이문구,
FEM SIMULATION AND EXPERIMENTAL VALIDATION OF RESIDUAL STRESS ON SURFACE BY MICRO FORGING PROCESSES
, XXX International Conference on Surface Modification Technologies (SMT30)
(Jun, 2016)
[학술회의]
염현호, 전용호, 설태호, 이문구, 최병주,
Design of high strength steel plate fatigue specimen for accelerated ultrasonic fatigue test
, 16th euspen
(Jun, 2016)
[학술회의]
전용호, 이문구, 박선진, 안범모, 이길연, 조성우,
NOVEL DEVICE AND METHOD OF TRACTION WITH MAGNET, WIRE AND CILP FOR MINIMALLY INVASIVE SURGERY
, Society of American Gastrointestinal and Endoscopic Surgeons (SAGES 2016)
, Vol.1
, No.1
, pp.16
-16
(Mar, 2016)
[학술회의]
한상훈, 이문구, 이수훈, 전용호, 천두호, 홍민성, 박종권,
Design of dynamic focusing unit to combine with 2D galvano-metor system
, 16th International Manufacturing Conference in China (IMCC 2015)
, Vol.1
, No.1
, pp.1466
-1451
(Oct, 2015)
[학술회의]
서창훈, 이문구, 김현정, 이수훈, 전용호, 조재훈,
Vibration Reduction Mechanism Based on Disturbance Rejection for UV-Laser Drilling Process with On-the-fly Control Scheme
, International Manufacturing Conference in China (IMCC)
, Vol.1
, No.1
, pp.545
-561
(Oct, 2015)
[학술회의]
최병주, 전용호, 염현호, 이문구, 홍민성,
Optimal design of micro forging mechanism for precise vibrating motion
, 2014 International Conference of Manufacturing Technology Engineers
, Vol.1
, No.1
, pp.18
-18
(Oct, 2014)
[학술회의]
설태호, 이문구, 전용호,
Design and verification of marking module for LED Post-process
, 2014 International Conference of Manufacturing Technology Engineers
, Vol.1
, No.1
, pp.27
-27
(Oct, 2014)
[학술회의]
김정기, 이문구, 서창훈, 이수훈, 전용호, 한상훈, 홍민성,
Gain scheduling control for positioning system with VCM and LM guide
, 2014 International Conference of Manufacturing Technology Engineers
, Vol.1
, No.1
, pp.16
-16
(Oct, 2014)
[학술회의]
이원기, 이문구, 이진우, 전용호, 이혜진,
A Condition-Based Real time Monitoring Systems for Precision eqipment with ball-screww via vibration signal
, 2014 International Conference of Manufacturing Technology Engineers
, Vol.1
, No.1
, pp.93
-93
(Oct, 2014)
[학술회의]
WANG ZHAOZHAO, 이문구, 김재승, 이수훈, 장승봉, 전용호,
Vibrational Mechanism Analysis of a Cylindrical Double Compoud Flexure Design
, 2014 International Conference of Manufacturing Technology Engineers
, Vol.1
, No.1
, pp.177
-177
(Sep, 2014)
[학술회의]
오민철, 안병민, 전용호, 염현호,
Enhancement of Fatigue Strength of AISI 4140 Steel by Laser Heat Treatment
, 13th International Symposium on Novel and Nano Materials
(Jul, 2014)
[학술회의]
전용호, 이문구, 김가은,
DESIGN OF DYNAMIC FOCUSING UNIT FOR 3D LASER SCANNER
, ASPE 2014 Spring topical Meeting
, pp.147
-150
(Apr, 2014)
[학술회의]
이길연, 이문구, 전용호, 박선진,
A novel traction/retraction device with magnet and hook for non-invasive surgery
, 44th International Symposium on Robotics (ISR2013)
(Oct, 2013)
[학술회의]
이문구, 손영웅, 전용호, 조희근,
Design of Stamping Module to Pattern Alignment Marks for LED Post-process
, ASPE 2013 Annual Meeting
, pp.343
-346
(Oct, 2013)
[학술회의]
김정기, 홍민성, 전용호, 김노유,
Effect of Ultrasonic Vibration on Micro-EDM
, 2013 International Conference of Manufacturing Technology Engineers
(Oct, 2013)
[학술회의]
이원기, 이문구, 이진우, 전용호, 홍민성, 남성호,
Failure diagnosis system for a ball-screw using vibration signals
, 2013 International Conference of Manufacturing Technology Engineers
(Oct, 2013)
[학술회의]
김가은, 이문구, 이수훈, 전용호, 박종권,
Optomechanical optimization of dynamic focusing unit for 3D laser scanner
, 2013 International Conference of Manufacturing Technology Engineers
(Oct, 2013)
[학술회의]
장승봉, 이문구, 이수훈, 전용호, 조성학,
Design of vibration device using double compound linear spring for laser machining
, 2013 International Conference of Manufacturing Technology Engineers
(Oct, 2013)
[학술회의]
설태호, 이문구, 손영웅, 전용호,
Design of Stamping Module to Pattern Alignment Marks for LED Post-Process
, 2013 International Conference of Manufacturing Technology Engineers
(Oct, 2013)
[학술회의]
박근태, 김현정, 김동권, 박진일, 이문구, 이진우, 전용호,
Experimental study on thermal performance improvement for vibration-assisted fins
, 7th World Congress on Biomimetics, Artificial Muscles and Nano-Bio
, pp.258
-259
(Aug, 2013)
[학술회의]
김우진, 전용호, 이문구, 이수훈, 홍민성, 조성학,
Effects of ultrasonic vibration assisted laser drilling on various materials
, Int'l conference of manufacturing Technology engineers 2012
, Vol.1
, No.1
, pp.57
-57
(Oct, 2012)
[학술회의]
이찬우, 전용호, 이문구, 이수훈, 박종권,
Design optimization a VCM dynamic focusing unit for laser scanning system
, Int'l conference of manufacturing Technology engineers 2012
, Vol.1
, No.1
, pp.79
-79
(Oct, 2012)
[학술회의]
전용호, 이문구, 최병주, 김동현, 이춘만, 조인식,
Effect of laser heat treatment on fatigue behavior in SCM440H
, Int'l conference of manufacturing Technology engineers 2012
, Vol.1
, No.1
, pp.263
-263
(Oct, 2012)
[학술회의]
전용호, 염현호, 이문구, 김경수, 김동현, 이춘만,
Effect of laser preheating on variable frequency peening of steel
, Int'l conference of manufacturing Technology engineers 2012
, Vol.1
, No.1
, pp.96
-96
(Oct, 2012)
[학술회의]
전용호, 조인식,
FATIGUE BEHAVIOR OF Ti-6Al-4V ALLOY UNDER COMBINED LOW AND HIGH CYCLE AND ULTRASONIC LOADING
, 15th International Conference on Advances in Materials and Processing Technologies
(Sep, 2012)
[학술회의]
전용호, Frank Pfefferkorn,
Experimental Study of Tool Wear Effect on Micro End Milling of Bio Compatible Metals
, 15th International Conference on Advances in Materials and Processing Technologies
(Sep, 2012)
[학술회의]
이찬우, 이문구, 김우진, 전용호, 홍민성,
Design of a VCM dynamic focusing unit for a laser scanning system
, 15th Int'l Conference on Advanced Materials & Processing Technologies
, Vol.1
, No.1
, pp.11691
-11696
(Sep, 2012)
[학술회의]
김우진, 전용호, 이문구, 이찬우, 조성학,
Effect of Ultrasonic Vibration Mechanism using PZT Actuator for Precision Laser Machining
, 15th Int'l Conference on Advanced Materials & Processing Technologies
, Vol.1
, No.1
, pp.11778
-11783
(Sep, 2012)
[학술회의]
전용호, 이문구, 성연욱, 이성민, 이혜진,
Impact Analysis on Automatic Focusing Actuator for Mobile Electronic Devices
, 15th Int'l Conference on Advanced Materials & Processing Technologies
, Vol.1
, No.1
, pp.11694
-11698
(Sep, 2012)
[학술회의]
이정재, 이문구, 전용호,
Design and Implementation of a Planar 3?DOF Parallel Micromanipulator
, The Twenty-Second International Conference on Systems Engineering
, Vol.1
, No.1
, pp.145
-150
(Sep, 2012)
[학술회의]
이문구, 이길연, 이찬우, 전용호, 박선진,
NOTES Cholecystectomy using a hook-attached magnetic traction device in a porcine model
, NOTES Summit 2012
, Vol.1
, No.1
, pp.1
-1
(Jul, 2012)
[학술회의]
Yanlu, 이문구, 이정재, 전용호, 홍민성,
Workspace and Dexterity Optimization of 3-PRR Planar Parallel manipulator
, 12th international conference of the european society for precision engineering and nanotechnology
, Vol.1
, pp.360
-363
(Jun, 2012)
[학술회의]
Lu Fei, 이문구, 김우진, 전용호, 홍민성,
Optimal Design of PZT actuated Ultrasonic Vibration Mechanism based on Taguchi Method for Precision Laser Maching
, 12th international conference of the european society for precision engineering and nanotechnology
, Vol.1
, pp.431
-434
(Jun, 2012)
[학술회의]
김태현, 이문구, 이정재, 전용호, 김호상,
Kinematic analysis and control of 3-DOF parallel manipulator
, The Twenty-sixth Annual Meeting of The American Society for Precision Engineering
, Vol.1
, No.1
, pp.1
-4
(Nov, 2011)
국내학술발표
[학술회의]
이문구, 유승하, 전용호,
구조 개선을 통한 반도체 검사장비 진동 저감 대책과 구동 제어 및 실증
, 한국생산제조학회 2023 추계학술대회
, Vol.1
, pp.331
-331
(Dec, 2023)
[학술회의]
김가은, 이문구, 이수훈, 전용호, 박종권,
3D 레이저 스캐너 초점 구동 장치의 광학적 설계
, 한국생산제조시스템학회 2013 춘계학술대회
, pp.293
-293
(Apr, 2013)
[학술회의]
장승봉, 이문구, 이수훈, 전용호, 박종권, 조성학,
레이저 가공용 고주파진동장치의 설계
, 한국생산제조시스템학회 2013 춘계학술대회
, pp.282
-282
(Apr, 2013)
[학술회의]
김태현, 이문구, 염현호, 이원기, 전용호, 김보현, 남성호,
사출성형기의 고장진단을 위한 진동 신호 분석에 대한 연구
, 한국정밀공학회 2012 춘계학술대회
, Vol.1
, No.1
, pp.641
-642
(May, 2012)
[학술회의]
김태현, 전용호, 이문구, 홍민성, 김호상, 최준명,
마이크로 렌즈 어레이 정밀 가공물의 형상 및 표면 측정 및 평가 시스템 개발에 대한 연구
, 2012 한국생산제조시스템학회 춘계학술대회
, Vol.1
, No.1
, pp.242
-242
(Apr, 2012)
[학술회의]
김우진, 전용호, Lu Fei, 이문구, 박종권, 조성학,
레이저 가공용 진동장치의 직진성 보완과 효과
, 한국생산제조시스템학회 2012년 춘계학술대회
, Vol.1
, No.1
, pp.25
-25
(Apr, 2012)
[학술회의]
이찬우, 전용호, 이문구, 박종권,
보이스 코일 모터를 이용한 레이저 자동초점 장치의 개발
, 한국생산제조시스템학회 2012년 춘계학술대회
, Vol.1
, No.1
, pp.30
-30
(Apr, 2012)
[학술회의]
조인식, 전용호, 곽동호, 신충식, 이지용,
Ti-6Al-4V 합금의 초고주기 피로특성 평가 : 초음파 피로시험 적용 사례 및 연구 동향
, 대한기계학회 2011년도 추계학술대회
(Nov, 2011)
[학술회의]
전용호, Frank Pfefferkorn,
PCBN 공구를 활용한 마이크로 레이저 예열 엔드밀링 가공 연구
, 2011 춘계학술대회
, Vol.1
, No.1
, pp.142
-143
(Apr, 2011)